Equipment & Facilities

State-of-the-art testing equipment from leading manufacturers, maintained and calibrated to ensure measurement accuracy and traceability

Precision Measurement Equipment

Advanced coordinate measuring machines and optical systems for accurate dimensional inspection

Coordinate Measuring Machine (CMM)

Specifications:

Travel: 1200×800×600mm, Accuracy: 1.8+L/300 μm

Applications:

Complex geometry measurement, GD&T analysis, first article inspection

Optical Vision Measuring System

Specifications:

Field of view: 200×100mm, Resolution: 0.5 μm

Applications:

2D dimensional measurement, profile inspection, SPC data collection

Surface Roughness Tester

Specifications:

Ra range: 0.01-100 μm, Accuracy: ±10%

Applications:

Surface finish evaluation, machining quality control

Roundness & Cylindricity Tester

Specifications:

Max diameter: 300mm, Accuracy: 0.02 μm

Applications:

Bearing races, shafts, precision cylindrical components

Chemical & Metallographic Analysis

Spectrometers and microscopes for material composition and microstructural examination

Optical Emission Spectrometer (OES)

Specifications:

Elements: C, S, P, and 20+ metals, Accuracy: ±0.01%

Applications:

Material verification, alloy grading, incoming inspection

X-Ray Fluorescence Spectrometer (XRF)

Specifications:

Elements: Na to U, Detection limit: 1 ppm

Applications:

Coating analysis, RoHS compliance, material identification

Scanning Electron Microscope (SEM)

Specifications:

Resolution: 3nm, Magnification: 5x-300,000x

Applications:

Fractography, microstructural analysis, failure investigation

Metallographic Microscope

Specifications:

Magnification: 50x-1000x, Digital imaging

Applications:

Grain size rating, inclusion analysis, phase identification

Non-Destructive Testing Equipment

Comprehensive NDT systems for detecting internal and surface defects

Digital Ultrasonic Flaw Detector

Specifications:

Frequency: 0.5-20 MHz, Channels: 4

Applications:

Weld inspection, forging and casting examination, thickness measurement

X-Ray Radiography System

Specifications:

Voltage: 160kV, Detector: Digital flat panel

Applications:

Internal defect detection, assembly inspection, porosity evaluation

Magnetic Particle Inspection Unit

Specifications:

Current: 0-10000A, AC/DC magnetization

Applications:

Surface and near-surface crack detection in ferromagnetic materials

Eddy Current Flaw Detector

Specifications:

Frequency: 100Hz-6MHz, Multi-frequency

Applications:

Conductive material inspection, crack detection, material sorting

Mechanical Testing Systems

Universal testing machines and specialized equipment for mechanical property evaluation

Universal Testing Machine (100kN)

Specifications:

Capacity: 100kN, Accuracy: ±0.5%

Applications:

Tensile, compression, bend testing of metals and composites

Impact Testing Machine

Specifications:

Energy: 300J, Temperature: -60°C to +200°C

Applications:

Charpy and Izod impact testing, ductile-brittle transition

Hardness Testing Station

Specifications:

Rockwell, Brinell, Vickers scales, Auto turret

Applications:

Hardness measurement across full range of materials

Fatigue Testing System

Specifications:

Capacity: 50kN, Frequency: 0-100Hz

Applications:

S-N curve determination, endurance limit evaluation

Quality Assurance & Calibration

All equipment is maintained under strict quality control procedures with regular calibration traceable to national standards.

Annual calibration by certified service providers
Daily verification checks before operation
Environmental monitoring and control
Comprehensive equipment maintenance records

Discuss Your Testing Requirements

Our technical team can recommend the most appropriate equipment and methods for your specific inspection needs

Contact Our Experts